Milliken Creek Monitoring Set
Milliken Creek Monitoring Set Map
Synoptic Investigative Red Flag Biological
Milliken Creek Monitoring Set Graphs
Select Water Quality Indicator

Note: The points on this graph reflect the average levels or concentrations of each water quality parameter. To see the individual data points that make up these averages, please scroll down and select a Sampling Location or a Monitoring Event from the tables below.

Selection of water quality indicators is controlled by drop-down menu on the upper right. Graph presents average values for both SYNOPTIC LOCATIONS and REDFLAG LOCATIONS over all monitoring events (see below right, table of events). Synoptic and Red Flag locations are ordered downstream to upstream (left to right) according to their distance from the stream mouth (see below left, table of locations). If distance to mouth has not been determined, the location defaults to the right end of the graph. Graph distances do not correspond to actual miles to mouth. INVESTIGATIVE LOCATIONS and BIOLOGICAL LOCATIONS are excluded.

Separate averages are reported for samples collected under base flow and stormwater conditions. These stream flow categories are loosely defined. BASE FLOW corresponds to normal or low flow conditions. STORMWATER corresponds to elevated flows following rain or snow melt, as judged by online hydrographs of USGS gauging stations, if available, and/or as judged by volunteers based on their familiarity with the stream and their observation of factors such as stream turbulence and turbidity. Though loosely defined, these two flow categories provide a useful approximation of the impact of runoff on water quality. See metadata for a description of methods for estimating stream discharge and nutrient loading.

Milliken Creek Sampling Locations

This table lists all SYNOPTIC LOCATIONS , REDFLAG LOCATIONS , INVESTIGATIVE LOCATIONS , and BIOLOGICAL LOCATIONS in the watershed of the monitoring set, their latitude and longitude coordinates, and the number of river miles to the stream mouth, where applicable. Select a location to view a detailed site map and timeline of chemical and microbiological results.

Name Code Latitude Longitude Miles from the mouth Type
Milliken Station #4 Mill 4 42.5978 -76.6317 0.16 SYNOPTIC
Milliken Station #3.5 Mill 3.5 42.5978 -76.6302 0.2 SYNOPTIC
Milliken Station #3 Mill 3 42.6073 -76.6159 1.34 SYNOPTIC
Milliken Station #2 Mill 2 42.6086 -76.6134 1.53 SYNOPTIC
Milliken Creek #1 Mill 1 42.6192 -76.5942 2.91 SYNOPTIC
Mill 3.25 Milliken Station #3.25 42.60405 -76.6231829 SYNOPTIC
Milliken Creek Monitoring Events

This table lists the dates of all chemical and microbiological monitoring events since the beginning of the monitoring set. A PARTIAL EVENT indicates that less than 90% of SYNOPTIC LOCATIONS were sampled. Select a date to navigate to a graph and table of raw chemical and microbiological data from the corresponding event.

Date Flow Type
1 August 17, 2023 BASE FLOW SYNOPTIC EVENT
2 June 26, 2023 BASE FLOW SYNOPTIC EVENT
3 April 12, 2023 BASE FLOW SYNOPTIC EVENT
4 November 14, 2022 BASE FLOW SYNOPTIC EVENT
5 September 12, 2022 BASE FLOW SYNOPTIC EVENT
6 July 06, 2022 BASE FLOW PARTIAL EVENT
7 June 08, 2022 BASE FLOW SYNOPTIC EVENT
8 October 26, 2021 STORMWATER SYNOPTIC EVENT
9 September 01, 2021 BASE FLOW SYNOPTIC EVENT
10 May 26, 2021 BASE FLOW SYNOPTIC EVENT
11 March 25, 2021 BASE FLOW SYNOPTIC EVENT
12 October 20, 2020 BASE FLOW PARTIAL EVENT
13 April 29, 2020 BASE FLOW SYNOPTIC EVENT
14 October 22, 2019 BASE FLOW SYNOPTIC EVENT
15 September 04, 2019 BASE FLOW SYNOPTIC EVENT
16 May 21, 2019 BASE FLOW SYNOPTIC EVENT
17 October 24, 2018 BASE FLOW SYNOPTIC EVENT
18 July 26, 2018 BASE FLOW SYNOPTIC EVENT
19 July 11, 2018 BASE FLOW PARTIAL EVENT